Handcrafted Ping Pong Paddles – Why Not?!
Handcrafted Ping Pong Paddles – Why Not?!


I’m starting by cutting veneers for each paddle These are cut with ease on my fully restored 1925 bandsaw The veneers are cut to a thickness of 3/32″ I’m using my wide belt sander to smooth the veneers and remove the saw marks from the bandsaw You can also use a hand plane or cabinet scraper to do this I use 3/16″ plywood for the paddle core This is a two part veneer glue made by Unibond 800 The tape helps hold the layers together so they don’t move during clamping The paper is used to prevent the two paddles from being glued together I made this template from 3/16″ plywood I use my spokeshave to clean up the edges Now I’m cutting out blanks for the handles, I’ve picked a walnut burl for this material The bandsaw marks are removed using my low angle jack plane This plane works exceptionally well on figured grain I cut the blanks to length(not shown) and then glue them on the paddles Here I’m trimming the handles to final length The handles get shaped using a rasp This is a card scraper which I use to remove any tearout or tool marks from the rasp Finally I sand the handles with the following grits 180, 220, 320, 0000 steel wool This one is Texas pecan And this one is mesquite Thanks for watching!

100 thoughts on “Handcrafted Ping Pong Paddles – Why Not?!”

  1. Eric So says:

    We usually have carbon in our blades… so yeah😂

  2. Sam Wende says:

    What beautiful wood!

  3. СЕРГЕЙ Маркович says:

    Неплохо выглядит, какие характеристики? Я бы купил.

  4. Mateusz Troka says:

    I have been playing table tennis for 17 years now, if you just add some carbon fibers and different wood composite I might be able to use your blade professionally:D

  5. bướm Bất tử says:

    Việt nam chỉ làm cái này đúng 1 tiếng là ok

  6. T.T.V MIDSTARS middelstum says:

    hello I am jeffrey kremer from the Netherlands
    I have a slight intellectual disability
    I do tabletennis
    I have no money for bat you could send me 1 free
    address is wilgenlaan 10 middelstum 9991EC jeffrey kremer
    thank you very much

  7. Mak'e Qila says:

    belum karbon

  8. SaintTammany says:

    Where is you ITTA approval?

  9. โอ้โห!! ไทยแลนด์ says:

    🖒🖒🖒🖒🖒🖒🖒🖒🖒

  10. Saulo Rodrigues says:

    I wish you`ve had put a rubber at it! impressive nonetherless.

  11. Camilo Carrasco says:

    Un crack

  12. Arvid Rehnberg says:

    where can i get a template?

  13. Rezaw says:

    Can you sell it to me?

  14. Aymerik Merette says:

    Very cool work

  15. Flips Like Crazy says:

    Make a skateboard

  16. Harry Stone says:

    That’s rubbish there not hand crafted he used machines cheat

  17. M Klobus says:

    Not a ping pong paddle close though

  18. Yohann Larmet says:

    C est vraiment jolie

  19. Anthony VanVolkinburg says:

    Maybe sell those and buy a pair of safety glasses

  20. Faseeh Nagi says:

    What u use for finishing? Can u link me?

  21. Jun Motovlog says:

    bushed alatnya canggih2 bener

  22. Naylla Gabriella Oliveira Barbosa says:

    o nome dela é Jenifer

  23. DeepSp4ce23 says:

    0:10 anyone else think of Peewee Herman?

  24. scott doran says:

    AR-15 lower out of black walnut?

  25. Rita Fava says:

    Quem é BR

  26. jordan house says:

    https://www.etsy.com/listing/604758982/raw-walnut-ping-pong-paddle-handmade-in?ref=shop_home_feat_1

  27. FARAON says:

    Сухарями играть собрался?

  28. Kim Davis says:

    Is them Forrest Gump's ping pong hitters?

  29. Mystery Moose says:

    Make a PewDiePie logo to Aid in the fight

  30. Iman Tirtaz says:

    I gues Weight its around 110gr…🙄🙄

  31. Qomar BAE says:

    Mantap skali kaka..subcribe balik kaka

  32. Oliver Diallo says:

    No rubber

  33. AllVie says:

    Awesome 👏👏👏👏👏👏👏👏

  34. Sanan Huseynzada says:

    WHERE IS THE RUBBLE?!

  35. Rony Bui says:

    Why no rubberrr??????………

  36. amr munim says:

    What abought rubber sheat??

  37. SMS_JAYBOY GAMING CHANNEL says:

    Hey dad

  38. Herison Kaslley says:

    Algum br aqui ????

  39. Bhisma Trivium says:

    Adding carbon and plat, you can be Timo Boll or Ma long's partner

  40. Kurgosh1 says:

    Do you change blades on that bandsaw for resawing vs. cutting relatively tight curves?

  41. Green-eyes Sings Soul Oh yeah baby! says:

    Nice shop. What a great place to relax. A few questions. What are the woods used to make the blade and the glue mix you use to laminate them together. On the handle it seems you used a simple wood glue instead. A beautiful product. Thanks for sharing.

  42. Alex key says:

    if you put condom on the rocket you can make more spin

  43. Ky_ky_ry_3a says:

    Useless game to play tennis you need circumcised rackets and not just derivative

  44. Александр Гаврутенко says:

    Мажор

  45. thisisnotmyrealname says:

    You could do this…

    or you could just buy one online

  46. ABobo says:

    Is the handle made of walnut?

  47. андро доник says:

    Хуйня полнейшая,с такими станками и такую хуйню сделать, видно руки из жопы растут

  48. Martin Smith says:

    The way you made these was like they were the first ones you ever made.

  49. Ramzes Great says:

    How much is coast bro?!) if you sale offcourse) Hand/made its a priceless

  50. Robert Yang says:

    good job, it could be better if you pick up the correct combination of the materials. the materials for ping pong paddles are not just those random woods….. and your paddles need rubbers.

  51. Bang-Ruei Huang says:

    What a beautiful woodworking!

  52. Andrey Green88 says:

    Мастер "золотые руки" его назвать нельзя.

  53. leon leon says:

    покупаю)))

  54. Yang Ster says:

    Oversized, lol. ITTF approved?

  55. Sergio Cabrera says:

    Yo nesecito paletas

  56. Sergio Cabrera says:

    De q pais sos

  57. 1thess523 says:

    Are you the guy out of Beorne TX? I believe my son watches you and he met you at Nordstroms at La Cantera one day 👍. If you are the same guy my son loves your work.

  58. AJI PINGPONG says:

    Good project

  59. Juan Gomez says:

    Control 0
    Spin 0
    Speed ?
    Ittf approved… ?
    But great video though ha

  60. Cleveland Carr says:

    Is that an old Oliver?

  61. Soy_una_amenaza_sukulenta says:

    awesome I liked this video

  62. Rodrigo Lobos says:

    handkrafted with those machines ?🤔

  63. Eduardo Freitas says:

    Hey great work, congrats.
    What glue did you use to apply the veneering? That brown one
    Thank you for sharing!
    And once more, congratulations for the work!

  64. Savoona ._. says:

    Forest gump is shook

  65. Sai Pirate says:

    mister did u use it?

  66. Inferno Core says:

    Now use rubber

  67. Inferno Core says:

    Maybe use Yasaka Mark V soft and Yasaka Mark V2

  68. Inferno Core says:

    Also soft

  69. ALFREDO PEREZ says:

    Very nice

  70. Lemonadetv says:

    Video: Hand made table tennis racket.

    My mind: this racket definitely cannot be used in public competitions.

  71. Lemonadetv says:

    And he uses some bad wood and he forgot to add carbon between the wood.

  72. alejandro diaz says:

    Vamos Ginóbili!

  73. lil fluffy says:

    No carbon?!!

  74. Frere Campbell says:

    Thanks for a wonderful carpentry project. You are close, but NO cigar. That last brown wash should be a Tack Cloth instead, to remove sawdust, and then glue on "one each of red and black real rubbers from the Table Tennis Store, with their specialized Water Based glue, and a self-sticking end grain tape, to go around the curved sides, to prevent absorption of moisture. Then you would have made for yourself a genuine pair of paddles.

  75. Peter Friedl says:

    Hm, such a professional Workshop and no router available ?

  76. Joshua Ending says:

    Well we're is carbon?

  77. K A says:

    He obviously does not play ping pong.

  78. Joshua Adams says:

    Great vid

  79. AurumJust says:

    All you need now is to put some rubbers on it

  80. M Hyun says:

    I play table tennis and it is probably worse than my Boll Alc blade by a long shot. The wood is bad and there is not even carbon to support it. Bad video.

  81. Le Potato says:

    I sand with 0000 grit sandpaper too!

  82. Chin Yang says:

    Sorry but I wouldn't use to play table tennis

  83. Amin Lahagu says:

    Simple

  84. OlejkaLive says:

    You’ve forgotten carbon layers

  85. promethazine says:

    put tenergy rubbers on it.

  86. JupyJones says:

    HE CALLED IT PING PONG!!!

  87. Savage King says:

    You should do a tennis racket next

  88. CHIKO IKOKO says:

    Lol nub

  89. firouz1913 says:

    thank you

  90. Fitchus II says:

    el sueño de todo jugador de tenis de mesa

  91. Qi Wi says:

    A lot of glue between the layers. And gluing is wrong. Author is absolutely out of the theme. Video just for fun. And we are laughing! 🙂

  92. Niels Cremer says:

    Whoever calls them paddles is a goddamn noob

  93. Zavier Manalo says:

    This could be a decent blade. Just put some rubber and your set

  94. Negard Colomiere says:

    That's the best hand made paddles I ever seen . Great work .

  95. Brannon White says:

    $50k planer and no sanders of any kind?😳🤦‍♂️

  96. tito1 bono says:

    Like 👍

  97. Kael Charette says:

    i thought that the thumbnail was chocolate.

  98. Giovanno L. says:

    This racket might not even better than YE, however when it comes to handcraft, it means more than any racket that you could see on the market. Well done Rawls!

  99. Sukarman Maman says:

    Weight of pimpong Blade not more than 90 grams.
    Id this Blade more than that, no value…

Leave a Reply

Your email address will not be published. Required fields are marked *